Work truck gear, ranked for the people who load it every morning.
Shop by truck
The best Chevy Silverado bed accessories
Chevrolet publishes 69.92 inches of floor on the short bed and 50.63 inches between the wheel wells. Eight things worth putting in that bed, in the order a working truck should buy them.
Our top pick: the Rough Country Rubber Bed Mat — Silverado / Sierra 1500 5'10" (2019-2026).
Heads up: we earn a commission when you buy through our links, at no extra cost to you — from Amazon Associates, and from brand partner programs we have joined directly through the Impact network. Amazon prices are pulled live and were last checked November 20, 2026; a brand list price carries the date we read it off the maker’s own page. When we cannot verify a price we say so rather than print an old one. How this site is funded.
How we know:Owner-report-verifiedSpec-verifiedWhat these mean
Top pickBest Silverado bed gear9.3/10★★★★★
Rough Country
Rough Country Rubber Bed Mat — Silverado / Sierra 1500 5'10" (2019-2026)
A tear-resistant rubber mat cut for the 5'10" GM bed.
Tap any row for the full write-up. Prices come straight from Amazon and are never typed in by hand.
Buy in this order and a Silverado bed is sorted for less than the price of one drawer system: a mat on the floor, a cover over the top, removable stake pocket D-rings so there is somewhere to tie to that is not a corner, then a lockable box. Everything after that — a cargo bar, bed lighting, a slide-out tray — is cheap, quick and genuinely useful. The drawer system is last because it is the one purchase here that changes what the truck can carry as well as how it carries it.
The reason this page is Silverado-specific rather than generic is that GM's published figures and GM's accessory listings do not use the same language. Chevrolet publishes three bed floor lengths — 69.92 in, 79.44 in and 98.18 in — along with 50.63 in between the wheelhousings and 22.4 in of box height. The accessory catalog then sells parts for a 5'10" bed, a 5.8 ft bed and a 5'8" bed, all of which mean that same short bed. Matching a part to a truck means reading the model years in the listing rather than trusting the bed name on the box.
Two numbers do most of the eliminating. About 64 inches across the outside of the rails is what a crossover box and a cover clamp to. 50.63 inches between the wheel wells is what a drawer module, a slide or a chest has to sit inside. Measure both yourself before ordering anything, because a drop-in liner costs you most of an inch each side.
The three things that change Silverado fitment
A Silverado is not one truck for accessory purposes. Three splits matter, and none of them is visible in the bed dimensions.
The 2019 new-body and Classic split. Chevrolet sold the new-body Silverado 1500 and the previous-generation Silverado 1500 Classic in the same model year. Their bed dimensions are close enough that measuring will not tell them apart, and their accessory parts are not interchangeable. The Tyger cover here publishes the exclusion by name: it does not fit the 2019 Silverado LD or Limited.
The MultiPro tailgate. GM's six-position tailgate changes what a mat, a liner or a bed extender can occupy at the back of the bed, and the exclusion is usually in the listing fine print rather than on the product photo. Read the fitment block, not the headline.
The CarbonPro bed. The composite bed offered on some trim levels is excluded outright by a number of parts in this category — every tonneau cover on this site that excludes a GM bed excludes that one. Where a maker publishes no position on it, that is a question to put to the maker rather than an assumption to make.
How we ranked these
This is a mixed category, so each product is scored against its own rubric and the ranking is by how much difference the thing makes to a working bed per dollar spent. Four criteria decided the order, and they are the same four used on the F-150 bed accessory page so the two lists can be read against each other.
What it protects or prevents. Floor damage, weather, load shift, things disappearing out of an open bed. Ranked by how expensive the problem is when it happens.
What it costs you in bed space. On a 69.92 in floor there is more room to play with than an F-150's 67.1 in, which is why a standard-depth crossover box is a reasonable choice on this truck where it is marginal on the Ford. Anything that eats length still has to earn it.
Fitment honesty. Whether the maker names the truck, the years, the bed length and the exclusions. The parts that publish the 2019 split and the tailgate exclusions score higher than the ones that leave you to find out.
Value against the truck. A half-ton work truck should not carry a thousand dollars of gear it does not use. Three of these eight cost less than a tank of fuel.
The picks, ranked
Prices come from Amazon when you load this page. Where no live price is available the button says check price rather than showing you a number we cannot stand behind.
No. 1Rough CountryOwner-report-verified
Rough Country Rubber Bed Mat — Silverado / Sierra 1500 5'10" (2019-2026)
Best for: Cheap floor protection that actually grips
$109.959% off · Price as of November 20, 2026. #ad
A tear-resistant rubber mat cut for the 5'10" GM bed. A mat is not a liner and does not pretend to be — it protects the floor, which is where 90% of the damage happens, and it stops cargo sliding, which a plastic tub does not.
Protection
9.1
Weather seal
8.9
Install
9.8
Durability
9.4
Value
9.7
Why we picked it
+High-friction surface keeps a load put
+Rolls up and comes out in seconds for cleaning
+Cheapest meaningful bed protection
Good to know. The bed sides stay exposed. If you load with a machine or throw scrap in, you need the sides covered too.
Published specifications
Fitment
Chevy Silverado / GMC Sierra 1500, 2019-2026, 5'10" bed
A clamp-on soft tri-fold for the current-body GM short bed at a fraction of the branded covers. It keeps rain and eyes off the bed, which is most of what a cover is for, and it does it for the price of a decent bed mat.
Protection
8.9
Weather seal
8.8
Install
9.7
Durability
8.8
Value
9.7
Why we picked it
+Lowest price of any Silverado cover here
+Clamp-on install, no drilling
+Published part number and a named year exclusion
Good to know. Seals and hinge covers are the compromise and both show up in the second or third winter. If the truck parks outside year-round in a salt state, buy up.
Published specifications
Fitment
Chevy Silverado / GMC Sierra 1500 2019-2026, 5'10" bed (70 in)
Drops into the factory stake pocket, published at 16,200 lb, and lifts straight out when you are done. No drilling, no sealed holes, and a rating that is in a completely different league from a bolt-on ring.
Build
9.4
Capacity
9.7
Install
9.7
Day-to-day access
9.5
Value
9.5
Why we picked it
+No drilling at all
+Very high published rating
+Removable, so the pocket is free again when you need it
Good to know. Your truck has to have usable stake pockets. Many newer trucks have them covered by bed rail caps, and some have none at all.
The narrow-body crossover. It eats noticeably less fore-aft bed length than a standard 19-20 in box, which is the whole point on a 5'5" or 5'7" bed where every inch in front of the wheel wells matters.
Build
9.1
Weather seal
9.0
Security
9.0
Bed usability
9.6
Value
9.5
Why we picked it
+Gives back several inches of bed floor versus a standard-width box
+Light enough for a one-person install
+Cheapest route into a real aluminum crossover
Good to know. If you carry long power tools in cases, the narrow body will fight you. A 19 in box swallows a circular saw case flat; this one does not.
$50.9929% off · Price as of November 20, 2026. #ad
A 40-70 in ratcheting bar that braces across the bed and holds a load against the tailgate. It is the cheapest piece of kit on this site and it stops more rattling, sliding and scratched paint than anything else you can buy for the money.
Build
9.2
Capacity
8.8
Install
9.8
Day-to-day access
9.7
Value
9.7
Why we picked it
+Costs less than a tank of fuel
+Ratchet tension holds without tools
+Stores flat behind the seat when not in use
Good to know. It is a brace, not a wall. It does not partition the bed into compartments and it will not hold a heavy load on its own.
Two 60 in strips, 180 LEDs, with a waterproof switch, blade fuse and a two-way splitter in the box. It is a complete hard-wired kit rather than a strip and a prayer, which is why this is the one to buy.
Build
9.2
Capacity
9.4
Install
8.9
Day-to-day access
9.7
Value
9.7
Why we picked it
+Complete kit — fuse and switch included, not sold separately
+Two strips light both sides properly
+Stated warranty, which most strip kits do not carry
Good to know. It is a wiring job. If you are not comfortable running a fused feed and finding a switch location, buy a rechargeable magnetic light instead.
$199.9510% off · Price as of November 20, 2026. #ad
A UV-protected polyethylene slide-out tray for 5'7" and longer beds. It solves the actual daily problem — reaching the bulkhead — for a tenth of what a steel slide costs.
Build
8.9
Capacity
8.8
Install
9.5
Day-to-day access
9.6
Value
9.7
Why we picked it
+Cheapest honest fix for bulkhead reach
+Polyethylene will not rust or need paint
+Light enough that it barely costs payload
Good to know. Polyethylene is not steel. Drop a loaded box on the corner and you will crack it. Treat it as a tray for bags, totes and lighter gear.
Identical design and identical reasoning, cut for the 6'6" standard bed on the next-generation Silverado and Sierra 1500. If you run a GM half-ton, this is the listing to order rather than the Ford one.
Build
9.7
Capacity
9.3
Install
9.5
Day-to-day access
9.8
Value
8.9
Why we picked it
+Correct fitment for the next-gen GM half-ton standard bed
+Same sealed drawers and load-bearing deck as the Ford unit
+Includes the system accessories in the listing
Good to know. Same caveat as every DECKED unit: you are trading vertical bed space and payload for drawers. Know which of those you need before you spend.
Published specifications
Fitment
Chevy Silverado / GMC Sierra 1500, 2019-current, 6'6" bed
Chevrolet Silverado 1500 and GMC Sierra 1500, 2019 to current, 6'6" bed
✗ Does not fit
Classic body style 2019 trucks
5'9" and 8 ft GM beds
2500/3500 HD beds
The order to buy in
If the budget arrives in pieces rather than all at once, this sequence leaves you with a usable truck at every stage and never makes you undo an earlier purchase.
Mat first. It is the cheapest item here and it protects the surface that is most expensive to put right. The Rough Country mat is cut for the 5'10" GM bed rather than trimmed to fit, which is the difference between a mat that stays put and one that creeps forward every time you brake.
Then the cover. Weather, privacy and the end of finding two inches of rainwater in a tool bag. On a short bed a cover is cheap because there is less of it. Order the generation-correct part and check the 2019 exclusions.
Then anchors. Four factory corners and nothing in between is the Silverado's bed as delivered. Removable stake pocket D-rings go in without drilling, publish a 16,200 lb rating and lift out when you need the pocket back.
Then lockable storage. A narrow-body crossover box gives back several inches of floor against a standard box. On this bed that is a comfort rather than a necessity, which makes it a question of what you carry rather than what fits.
Then a cargo bar, lighting and a slide-out tray. All three are cheap, all three take under an hour, and all three are things owners say they should have fitted first.
A drawer system last, if at all. It is the biggest day-to-day improvement on this page and the biggest commitment. Fit it when you know the truck is staying.
The bed figures, and what each one decides
Chevrolet's and GMC's published figures, with the exterior rail width from UWS. Full table with sources on the Silverado bed dimensions page.
Figure
Published value
What it decides
Floor length, short bed
69.92 in
Box, mat and tray length
Floor length, standard bed
79.44 in
Drawer system and slide fitment
Floor length, long bed
98.18 in
Whether a 48 in box still leaves usable floor
Width between wheelhousings
50.63 in
Chests, drawer modules, slide-out trays
Inside box height
22.4 in
Whether a load sits below the rail line
Exterior bed rail width
about 64 in
Crossover box size class and cover clamps
The 69.92 in short-bed floor is the figure worth holding on to. It is nearly three inches longer than an F-150's short bed, which is why a standard-depth crossover box leaves a Silverado with usable floor where the same box on a Ford leaves very little. The arithmetic and the box size classes are on what size tool box fits a Silverado, and the full dimension table with its sources is on the Silverado bed dimensions page.
What goes wrong on this truck
Buying a mat by bed name instead of model year
The same GM short bed is sold as 5'8", 5'10" and 5.8 ft depending on whose catalog you are reading. The model years are the reliable identifier, and on a 2019 truck they are still not enough on their own — you need to know whether it is the new body or the Classic. Confirm that first and the rest of the list gets much shorter.
Fitting a box and then trying to add a rack
A crossover box and most clamp-on ladder racks want the same few inches of bed rail. If the truck is getting both, decide the order before buying either — the best ladder racks for a Silverado 1500 sets out which racks coexist with a box or a cover and which publish an outright exclusion, and the same list for a Ram 1500 shows how differently the arithmetic lands on a wider bed. If the rails end up fully committed, a small underbody box is the lockable storage that needs no rail at all.
Assuming the drawer system fits the short bed
The DECKED part in the list below publishes the 6'6" bed from 2019 to current, and excludes the Classic body, the 5'9" and 8 ft GM beds and the 2500/3500 HD beds. A drawer system is the one purchase on this page where ordering the wrong part means a freight return rather than a trip to the parts counter.
What we would actually buy
On a Silverado 1500 short bed used for work: the Rough Country mat, the Tyger T3 cover and a set of stake pocket D-rings, which together cost less than the cheapest drawer system and solve the three problems a bare bed actually has. That is the whole recommendation for most trucks, and the rest of this list is optional.
If the truck carries tools every day: add the Dee Zee narrow crossover for lockable storage, then the Rough Country slide-out tray so the things at the bulkhead are reachable without climbing in. The tray is published for 5'7" and longer beds, which covers every Silverado bed length.
The budget pick on this page is the Keeper ratcheting cargo bar, adjustable 40 to 70 inches. It is the cheapest item here and it stops a load sliding into the tailgate, which on a short bed with a smooth plastic mat happens more often than owners expect. Buy it with the mat rather than after the first time something slides.
The Michelin mat is the alternative to the Rough Country if the Rough Country part is out of stock — same bed, same years, published as a 5.8 ft part. Neither maker publishes a thickness figure, so the cards say not published rather than carrying a number we cannot source.
Questions people actually ask
What bed accessories fit a Chevy Silverado 1500?
Parts published for the model years your truck was built in, which is more reliable than the bed name. Chevrolet's short bed appears in accessory catalogs as 5'8", 5'10" and 5.8 ft, all describing the same 69.92 in floor. On a 2019 truck you also need to know whether it is the new-body Silverado 1500 or the Silverado 1500 Classic, because their accessory parts are not interchangeable even though their bed dimensions are close.
What is the first bed accessory to buy for a Silverado?
A bed mat. It is the cheapest item on this page and it protects the surface that costs the most to put right. After that, a cover, then removable stake pocket D-rings so there is somewhere to tie to between the four factory corners, then lockable storage if the truck carries tools.
Will bed accessories fit a Silverado with the MultiPro tailgate?
Some will and some will not, and the answer is in the listing's fitment block rather than its headline. GM's six-position tailgate changes what a mat, a liner or a bed extender can occupy at the back of the bed, and several parts in this category exclude it outright. Read the exclusions before ordering; where a maker publishes no position we will not invent one.
Do these accessories fit the CarbonPro composite bed?
Treat that as a question for the maker before you order. The CarbonPro bed is excluded outright by a number of parts in this category, and every tonneau cover on this site that excludes a GM bed excludes that one specifically. None of the universal picks on this page publishes a CarbonPro position either way.
Does a crossover tool box fit a Silverado short bed?
Yes, with more margin than on a Ford. The Silverado's 69.92 in short-bed floor is nearly three inches longer than an F-150's, so a standard-depth crossover box still leaves usable floor behind it. The exterior bed rail width is about 64 inches, which is what the box clamps to. The size classes are set out on what size tool box fits a Silverado.
Which Silverado bed accessories need drilling?
None of the eight on this page. The mat drops in, the cover clamps to the rails, the D-rings drop into the stake pockets and lift back out, the crossover box clamps to the rails, the cargo bar ratchets between the walls, the light strips stick on, the slide-out tray sits on the floor and the DECKED system publishes a no-drilling install. That matters most on a leased truck, where drilling is usually not an option at all.
Last reviewed November 20, 2026. Think a figure here is wrong? Tell us at contact@toolboxandtruck.com and we will check it, fix it and date the correction — see our editorial policy.